WC installation system and bidet faucet

Installation information
The installation height of the WC-Seat should be 40 cm.

Water quantities
Operation of the bidet fitting with low-pressure displacement water heaters is not possible for the bidet fitting!
Requirements to ensure good functioning of this shower solution:

Min. 0.5 bar flow pressure
recommended flow pressure 1-5 bar
Max. 10 bar operating pressure
Test pressure 16 bar

If static pressure is greater than 5 bar, fit pressure reducer.
Avoid major pressure differences between cold and hot water supply.

Flow rate at 3 bar flow pressure: approx. 10 l/min
Hot water inlet max. 80°C
Recommended: (energy saving) 60°C

General tips for installation
Please make sure that the water volume and the water pressure is adequate so as the waste is sufficiently be dimensioned.